Memory Problems; Usb Device Problems; Expresscard Problems - Fujitsu FPCM11801 User Manual

Problem
You have installed an 
external keyboard or
mouse, and it does not
seem to work.
You have connected an
external keyboard or a
mouse and it seems to be
locking up the system.

Memory Problems

Your System screen in the
Control Panel does not
show the correct amount
of installed memory.

USB Device Problems

Your system does not rec-
ognize a USB device you
have installed, or the
device does not seem to
work properly.

ExpressCard Problems

A card inserted in the
ExpressCard slot does not
work or is locking up the
system.
Possible Cause
Your external device is not
properly installed.
Your operating system is not
set up with correct software
driver for that device.
Your operating system is not
setup with correct software
driver for that device.
Your system has crashed.
Your memory upgrade mod-
ule is not properly installed.
You have a memory failure.
The device is not properly
installed.
The device may have been
installed while an application
was running, so your system
is not aware of its installation.
Your device may not have the
correct software driver active.
Card is not properly installed.
109 - Troubleshooting
Possible Solutions
Re-install your device. See "Device Ports" on page 99.
Check your device and operating system documentation and
activate the proper driver.
Check your device and operating system documentation and
activate the proper driver.
Try to restart your Tablet PC.
Remove and re-install your memory upgrade module. See
"Memory Upgrade Module" on page 90.
Check for Power On Self Test (POST) messages. See
"Power On Self Test Messages" on page 116.
Remove and re-install the device. See "Device Ports" on
page 99.
Close the application and restart your Tablet PC.
See your software documentation and activate the correct
driver.
Remove and re-install the card. See "ExpressCards" on
page 88.