Introduction to HP Fibre Channel Products
Figure 3
1
2
Figure 3: Director 2/64 (rear view)
The director provides a modular design that enables quick removal and
replacement of FRUs. The power module assembly at the rear of the director also
provides a 9-pin, D-type subminiature (DSUB) maintenance port for connection
to a local terminal or remote terminal. Although the port is typically used by
authorized maintenance personnel, operations personnel can use the port to
configure director network addresses.
22
illustrates the rear of the director.
Redundant fan modules
Power module assembly with AC
power switch
Redundant serial crossbar
3
(SBAR) assemblies
SAN High Availability Planning Guide