Table of Contents
Advertisement
1.5
Warnings and Cautions
This guide and all associated guides in the user documentation set (the Quick Start Guide,
the Hardware Guide, and the Software Guide) should be used by qualified technical
personnel with experience installing and configuring PCI controllers.
Read and adhere to all warnings, cautions, and notices in this guide and all the guides in
the user documentation set supplied with this product.
Warnings
•
The connection of a non-shielded equipment interface cable to this equipment will
invalidate the FCC certification of this device and may cause interference levels that
exceed the limits established by the FCC for this equipment. It is the responsibility of
the user to obtain and use a shielded equipment interface cable with this device. If the
equipment has more than one interface connector, do not leave cables connected to
unused interfaces unless otherwise instructed to do so in the user manual.
•
Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
Cautions
•
Take precautions to prevent electrostatic discharge (ESD) damage before handling the
IIR controller.
•
ESD can damage controller components. Perform the described procedures in this
guide only at an ESD workstation. If no such station is available, you can provide some
ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of
the computer chassis.
Hardware Installation and User's Guide
IIRRZ1CHLS
E-G016-02-3371 (A)
Intel Corporation
Refer to Date Code on Product
Intel Corporation / Germany
Getting Started
11
Advertisement
Table of Contents
