Table of Contents
Advertisement
Configure Logical Drives
Logical drives (hierarchy level 2) are installed in the Advanced Setup menu.
The Configure Logical Drives screen is shown in Figure 50.
Keyboard Commands
Use the <F4> key to lists all hard drives of a logical drive. If it is a logical drive of the type Disk, it
only consists of one single hard drive. If a logical drive consists of more hard drives, it is of the
type Chain (concatenation of several hard drives). <F3> loads all hard drives and <F5> identifies
drives by turning the hard drives LED on and off.
To configure and setup a new logical drive, select "Create new Logical Drive." StorCon displays a
list of free physical drives (which are not already part of a logical drive). See Figure 51.
110
Figure 50. Select Logical Drive
Figure 51. Select Physical Drive
Intel RAID Controller SRCU32 User's Guide
Advertisement
Table of Contents
