Tape Player; Selecting Tape Player; Playing A Tape; Tape Counter - RCA RS2302 - Neo-5 CD Shelf System User Manual

Tape Player

EN

Selecting Tape Player

Press SOURCE on the main unit or TAPE on the
remote control to select tape mode.

Playing a Tape

1. In tape mode, press on the cassette door to open
it.
2. Insert a tape into the door and push the door
closed.
3. Press SKIP BACKWARD
on the main unit or TUNING
remote control to position the tape to the
desired starting position.
4. Press PLAY to begin playback.
5. Press PAUSE to pause playback.

Tape Counter

You can keep track of tape position with the tape
counter. Press PROG/SET to reset.
10

Recording

From Tuner

1. Insert a tape into deck.
2. Press SOURCE repeatedly on the main unit or
3. Press BAND to access the desired radio band.
4.. Press SKIP BACKWARD
5. Press RECORD to enter Record standby. Press
6. press STOP

From CD

1. Insert a tape into deck .
2. Press SOURCE repeatedly on the main unit to
3. Press SKIP BACKWARD
/ SKIP FORWARD
or on the
4. Press RECORD to enter Record standby. Press
5. press STOP
From AUX
1. Insert a tape into tape deck.
2. Check that the auxiliary device has been
3. Start playback on the auxiliary device.
4. Press RECORD to enter Record standby. Press
5. Press STOP
TUNER on the remote control to select
Tuner .
FORWARD on the main unit or TUNING
or the remote control to tune to the station
to be recorded.
again to begin recording.
to end recording.
select CD then press DISC SKIP or DISC1 / DISC2
/ DISC 3 / DISC 4 /DISC 5 to select the disc to be
recorded.
FORWARD on the main unit or TUNING
or on the remote control to select the track
to be recorded.
or
Press PROG/SET to enter program mode.
again to begin recording.
to end recording.
connected correctly to the AUX connector on the
front of the system.
again to begin recording.
to end recording.
or SKIP
or SKIP