Sonos CONTROLLER - FOR IPAD User Manual page 13

Chapter 1: System Setup
• Repeat to install the other speaker wires.
• If your speakers have banana connectors, you can insert the plugs directly into the banana jacks on the back of the
ZonePlayer 120 instead.
Attach the power cord and plug into a wall outlet—make sure the Voltage Switch on the back of the Zone Player is set to the
2.
proper position for your country before applying power.
The Mute button indicator and the ZonePlayer Status indicator will begin to flash. (If the ZonePlayer was previously connected to
another Sonos Multi-Room Music System the Zone Player Status indicator may light solid white instead.
If you are connecting a ZonePlayer 90
Attach the power cord and plug in the ZonePlayer.
1.
The Mute button indicator and the ZonePlayer Status indicator will begin to flash. (If this ZonePlayer was previously
connected to a Sonos Multi-Room Music System, the ZonePlayer Status indicator may light solid white instead.)
Connect your ZonePlayer 90 to an external amplifier by choosing one of the following options:
2.
Connect to a home theater or amplifier
• If you have digital inputs on your home theater or amplifier, you can use either a TOSLINK® optical audio cable or a digital
coaxial cable to connect the ZonePlayer 90's digital output to the digital input on the receiver.
• If you have analog inputs on your home theater or amplifier, use a standard RCA audio cable to connect a ZonePlayer's
analog audio output to the audio inputs on the receiver.
1-7