Table of Contents
Advertisement
OPERATING FIREPLACE
Continued
Selector Switch in REMOTE Position
(Optional Hand-Held Remote Control)
REMOTE
OFF
ON
Control Knob
Figure 39 - Setting the Selector Switch,
Control Knob, and Flame Adjustment
Knob for Hand-Held Remote Operation
ON/OFF SERIES (MODEL GHRCB)
Hold the control button on the hand-held remote
until burner turns on. Hold the control button
again until burner turns off (see Figure 40).
press both buttons on hand-held re-
TO LOCK
mote control until light stops flashing. Hand-
held remote control is now locked. If the fire is
on it will be turned off automatically. In the
locked state, the light will not light up when
any button is pressed.
press both buttons together on
TO UNLOCK
hand-held remote control until the light stops
flashing. The hand-held remote is now unlocked.
Figure 40 - On/Off Hand-Held Remote
Control Unit (GHRCB)
THERMOSTAT SERIES (MODEL
GHRCTB)
The hand-held remote can be operated using
either the manual mode (MANU) or thermo-
static mode (AUTO) (see Figure 41). To select
Fahrenheit/Centigrade mode display, carefully
press the ˚C/˚F mode button with the end of a
paper clip or similar blunt object.
Manual Mode
1. Press the POWER and LOCK buttons to-
gether to turn on the hand-held remote
control.
2. Press the MANU button to turn on the
fireplace.
3. Press the POWER and LOCK buttons to-
gether to turn off the fireplace.
24
Flame
Adjustment Knob
Control
Button Turns
Burners On
and Off
www.desatech.com
Auto (Thermostatic) Mode
1. Press the POWER and LOCK buttons to-
gether to turn on the hand-held remote con-
trol.
2. Press AUTO button to select this mode.
3. Set the desired room temperature by press-
ing the TEMP + or - buttons.
4. Press the POWER and LOCK buttons to-
gether to turn off the fireplace
Note: Do not leave the hand-held remote in the
AUTO mode close to the fireplace. The radiant
heat from the fireplace will turn off the fire-
place. Ideally, place the hand-held remote in the
center of the room facing towards the fireplace.
Note: Do not hold the hand-held remote for a
long time. Body temperature will affect its op-
eration in the AUTO mode.
Digital Display
Shows
Temperature
and Settings
Turns Burners
On or Off
Decreases
Room
Temperature
in AUTO Mode
Locks System to Prevent
Accidental Ignition
Figure 41 - Thermostat Hand-Held
Remote Control Unit (GHRCTB)
Safety Features
When away from home for an extended period
of time or as a child safety feature to prevent
accidental ignition of the fireplace, the receiver
ON/OFF/REMOTE switch should be in the
OFF position.
Auto Shutoff Feature
1. If the average room temperature exceeds
82 degrees Fahrenheit (28 degrees Centi-
grade), the hand-held remote control will
perform a safety override and shut the fire-
place off. This feature is not available in
the MANU mode.
2. The receiver continuously receives signals
from the hand-held remote to control the
room temperature. If the hand-held remote
is misplaced, obstructed, or for any reason
cannot transmit to the receiver, the receiver
will shut off the fireplace after 8 minutes.
Turns Hand-
Held Remote
On or Off and
Allows You to
Choose the
Manual Setting
Selects Auto
Setting
Increases
Room
Temperature in
AUTO Mode
113110-01A
Advertisement
Table of Contents
