Configuring Sources - Russound UNO-TS2 Instruction Manual

INSTALLER GUIDE

Configuring Sources

After sources have been configured and named
in the CAV6.6 or CAM6.6 system, they must also
be set up in the UNO-TS2. This procedure
assigns the correct screens for each source type.
For proper operation, Russound components
must be given the correct Source Type in the
Source Setup process.
Russound Component
ST2 Tuner, CAM6.6T
ST2-XM(2), ST2S, CAM6.6X Satellite Radio
SMS3 Media Server
iBridge Dock (iPod)
1. The UNO-TS2 must be connected to the con-
troller and both must be powered on. Wait 20
seconds after being powered before beginning
the configuration process.
2. Press the "Options" button on the home screen.
3. Press the "Screen Set Up" button on the
Options screen.
4. Press and hold (for 3 or more seconds) the
"Installers Setup" button on the Screen Setup screen.
Options button
Installers Setup
Source Setup button
22
5. Press the "Source Setup" button on the
Installer Setup screen.
6. Press the "Source 1" button. When entering
the Source Setup menu for the first time after a
controller has been programmed, the Source
Name may take a few seconds to appear cor-
rectly in the Source Setup screen display. Simply
wait a few seconds and the correct Source
UNO-TS2 Source Type
Name will appear.
Russsound Tuner
7. Press the left/right arrows next to the source
type field on the screen until the proper source
SMS3 Media Server
type name appears. This type must match the
iPod (Bridge)
source connected to source 1 on the controller.
The Name field is automatically configured from
the controller.
8. Press the "back" button.
9. Repeat the last 3 steps for up to 5 more sources.
10. Press the "home" button.
11. Confirm that all configured sources appear
on the main screen buttons.
12. Press each of the source buttons and con-
firm that the correct screen is loaded.
Options
Screen Setup button
Source Setup
Source # button
Screen Setup
13
10
13
Installers Setup button
Source 1 Setup
CD
CD Changer
Source type