Peripheral Setup - Russound CAM66T 1 Instruction Manual

INSTALLER
INSTALLATION MENU
The following items make up the Installation Menu:
PERIPH SETUP (PerSu)
CTRLR SETUP (CtlSu)
MACRO EDITOR (MacEd)
PERIPH SETUP (PerSu)
Peripheral Setup allows the CAM6.6's optional internal source to be configured.
The following items can be found in the PERIPH SETUP menu:
MEM NAME (MemNm)
FACTORY INIT (FInit)
MEM NAME (MemNm)
NOTE: A memory preset must be created and saved before it can be named. Once it is saved, the
preset's Tuner #, Bank # and Memory # must be entered in the following procedure.
This procedure accesses a name entry field to enter a custom name for a memory preset. See
Periph Setup - Flow Chart on page 63
1. BANK # –
(Bank#)
2. MEMORY # –
(Mem #)
3. MEMORY NAME –
(MemNm)
BANK NAME (BnkNm)
This procedure accesses a name entry field to enter a custom name for each of the tuner's six
banks. See Periph Setup - Flow Chart on page 63
1. BANK # –
(Bank#)
48
SOURCE SETUP (SrcSu)
POWER MGT (PwMgt)
SYSTEM INFO (SInfo)
BANK NAME (BnkNm)
SYSTEM INFO (SInfo)
Select the BANK # of the memory preset.
Select the MEMORY # of the preset to be named.
Use the volume up/down keys to select a character and left/right
keys to change a character position. A blinking cursor indicates
placement of the character being entered. Names can be from 1
to 5 characters in length. If adding names from 6-12 characters,
it is suggested you use an optional UNO-S2 keypad.
Select the BANK # of the memory preset.
ZONE SETUP (ZonSu)
LEARN IR (LrnIR)
CONTROLLR ID (CtlId) REGION (Rgion)