Dhcp; Dhcp Settings - TP-Link TL-WR340G Installation Manual

Current Status - The connected wireless station's running status, one of STA-AUTH /
STA-ASSOC / AP-UP / WPA / WPA-PSK /WPA2/WPA2-PSK/None
Received Packets - Packets received by the station
Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.
Note: This page will be refreshed automatically every 5 seconds.

3.6 DHCP

Figure 3-22 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 3-22): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are provided
below.
3.6.1

DHCP Settings

The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PC(s) that are connected to the router on the LAN.
The DHCP Server can be configured on the page (shown in Figure 3-23):
DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must
TL-WR340G/TL-WR340GD
Figure 3-23 DHCP Settings
31
54M Wireless Router User Guide