Advertisement
Available languages
Available languages
Quick Links
Download this manual
See also:
Use and Care Manual
INSTALLATION
AND SERVICE MUST BE PERFORMED BY
A QUAUHED
INSTALLER.
IMPORTANT:
SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
[f the information
in this manual is not followed
exactly, a fire or explosion
may result causing
property
damage, personal injury or death.
FOR YOUR SAFETY:
--
Do not store or use gasoline
or other flammabJe
vapors and liquids
in the vMnity
of this or any other
appliance.
-- WHAT TO DO tF YOU SMELL GAS:
*
Do not try to light any appliance.
Do not touch any e[ectrka[
switch; do not use any phone in your building,
Immediately
call your gas supplier
from a neighbor's
phone.
Follow the gas supp[ier's
instructions.
,,
ff you cannot reach your gas supplier,
ca[[ the fire department.
--
Installation
and servke
must be performed
by a qualified
installer,
servke agency or the gas supplier.
For Standard
Installation:
Gas Cooktop Dimensions
Gas Cooktop Cutout
Dimensions
/A
2"(5.1 cm) Dia.
Opening to route --
power cabFe
* 30" (76.2 cm) rain. for
unprotected cabinet and
24" (61 cm) rain. for cabinet
with protected bottom surface.
X4"
(!0.2 cm x 10.2 cm)
opening to route gas supply.
71/4
(18.4 cm)
F
G
Do not slide unit into cabinet cutout,
Protruding
screws on the bottom
of ur it
may damage the bottom
front finish.
Figure 1
**Note: D & E are critical to the proper
installation of the cooktop. D reflects the
finished dimension. Due to the variation in
countertop materials, it is recommended to first
undercut this dimension, and then adjust it
upon installation of the cooktop.
All dimensions are stated in inches and (cm).
NOTE: Wiring diagrams for this cooktop
are enclosed in this booklet
318201459
(0407)
Rev A
English - pages
1o10
Espar_ol - Diginas
11-19
Wiring
Diagram
page - 20
Advertisement
Related Manuals for Kenmore 3050 - Pro 36 in. Gas Slide-In Cooktop
Summary of Contents for Kenmore 3050 - Pro 36 in. Gas Slide-In Cooktop
- Page 1 INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUAUHED INSTALLER. IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. [f the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.
- Page 2 * 30" (76.2 cm) rain, for For Installation with the optional Stainless Steel Backsplash, unprotected cabinet and 24" (6! cm) rain, for cabinet with protected bottom surface. Gas Cooktop Dimensions 2" (5.1 cm) 9" (22.9cm) Optional Stainless Steel Backsplash ***Note: Applies only in case 4"X 4"...
-
Page 3: Important Notes To The Installer
Be sure your cooktop is installed and grounded important Notes to the installer properly by a qualified installer or service Read all instructions contained in these installation technician. instructions before installing the cooktop. • This cooktop must be electrically grounded Remove all packing material before connecting the accordance with... - Page 4 13" (33 cm) max. depth for cabinet installed above cooktop 30" (76.2 cm) Min. Clearance Between the Top of the Cooking 30" (76.2 cm) min. Platform and the Bottom clearance between of an Unprotected Wood the top of the or Metal Cabinet cutout and nearest cooking platform and "_...
- Page 5 Wall Outlet Location The conversion must be performed by a qualified service technician in accordan(e with the kit instructions and all local codes and requirements. Failure to follow instructions could result in serious injury or property 4 ,,_ damage. Tile qualified agency performing this work assumes responsibility for the conversion.
- Page 6 Thesupply lineshould beequipped withanapproved Grounding Instructions shutoffvalve. T his valve shouldbelocated inthe same IMPORTANT Please read carefully. roomasthecooktop andshould beina location that allowsease of opening andclosing. Donot blockaccess For personal safety, this appliance must be properly to theshutoffvalve. T ilevalve isfor turningonor grounded.
- Page 7 Check Operation Turn on Electrical Power and Open Main Shutoff Gas VaIve Refer to tile Use and Care Guide packaged with the cooktop for operating instructions and for care and Check the Igniters cleaning of your cooktop. Operation of electric igniters should be checked after cooktop and supply line connectors have been Do not touch the burners,...
- Page 8 Model and Serial Number Location The serial plate is located on the underside of the cooktop. When ordering parts for or making inquires about your range, always be sure to include the model and serial numbers and a lot number or letter from the serial plate Hollow of your cooktop.
- Page 9 Notes:...
- Page 10 Notes:...
- Page 11 LA INSTALAaON Y EL SERVlaO DEBEN SER REAUZADOS POR UN INSTALADOR CAUF?CADO. IMPORTANTE: GUARDE ESTAS INSTRUCaONES PARA USO DEL INSPECTOR ELF:CTR_CO LOCAL LEA Y GUARDE ESTAS INSTRUCaONES PARA FUTURAS REFERENaAS _F!_ Si todas [as instrucdones de _ste manua[ no son observadas a [a [etra, sepuede ocurrk incendios o exp[osiones que pueden causar daffos materia[es, [esioneso [a muerte.
- Page 12 * 30" (76.2 cm) rain para un armario protegido. Para ver la Instalaci6n con el Panel Protector Opcional de 24" (6! cm) rain para una superficie no protegida. Acero Inoxidable. 30"(76.2 cm) Dimensiones de la parrilla Min.* de cocinar a gas Panel Protector Opcional de Acero Inoxidable de -- 9"...
-
Page 13: Instrucciones De Seguridad Importantes
medidas de seguridad. Vienen con el Manual del Usuario. Notas importantes para el insta[ador: Lea atentamente el manual. 1. Lea todas las instrucciones de instalacion antes de realizar la instalaci6n de la plancha de cocinar. 2. Retire todos los articulos de embalaje antes de realizar •... - Page 14 13" (33 cm) m_x, 30" (76.2 cm) rain. de espacio entre la parte superior del fogon y la 1 "(2.5 cm) Mfnimo distancia parte inferior de un entre el borde posterior del armario de madera o 30" (76.2 cm) M[nimo de hueco y lamas cerca espacio entre la parte superior metal sin proteccion.
- Page 15 Si desea hater la conversi6n para utilizar el gas propano, Ubicad6n de [a toma de corriente de [a pared use las piezas (:on orificios fijados provitos en el paquete del manual de instrucciones para la instalaci6n en el paquete escrito "PARA LA CONVERSIONEN GAS PROPANO".
- Page 16 Eltubodesuministro d egasdebreria i ncluir u navalvula de Requerimientos el_ctricos: cierre certificada. Esta valvula deberia estar ubicada e nla Un circuito derivado conectado correctamente a tierra de misma habitaci6n d elaplancha d ecocinar y deberia e star 120 voltios, 60 Herz protegido por un interruptor enunlugar quepermita unaabertura y cierre faciles.
- Page 17 VerifiqueJaoperaci6n Abierte eJ suministro eJ_ctrico y ta v&lvuJa Refiera a l Manualdel Usuarioqueviene conlaplancha derre principal del gas. decocinar p aralasinstrucciones defuncionamiento yel mantenimiento y lalimpieza d esuplancha d ecocinar. Verifique los dispositivos de encendido La manipulation de los dispositivos de encendido Notoquea losquemadores.
- Page 18 Mode[o y ubicad6n del nOmero de serie La placa de n0mero de serie est4 ubicada en el lado de abajo de la caja de quemadores. Aseg0rese de incluir el modelo, n0mero de serie y el Elhueco del n0mero o letra del Iote que se encuentran en la plata, en vastago d ela todo pedido de partes o solicitud de informaci6n acerca de vdvula...
- Page 19 Notas:...
- Page 20 BURNER IGNITER OPTIONAL IONB_J DDEMABDR ENC_ND[BO SLIpERIOR INTENCTRABEF4D DPBIONAi BDUGJE D'ALLUr_AGE BRULEUD DERECIqO INTER &llbM CAU r I ON : RIGHT REAR /dtREB PROR TD DISCONNECTION _/HEN SERVICING CONTRD! 5 R_ i i B AR _'[RING ERROR DR,USE iI'_P4OPER D_NG_ROLJS OPERATION BK I VER I FY PROPER...