Bernina Electronic 1008 Owner's Workbook page 46

Owners manual
Hide thumbs Also See for Electronic 1008:
Table of Contents

Advertisement

M
ASTERING
Y
OUR
BERNINA
®
• Select Zigzag Stitch #2/green - SW 2mm and SL 2mm.
• Position the elastic on the wrong side of the fabric, along one 6" edge.
• Allow a 2" tail of elastic to extend beyond the fabric.
• Using the tail of elastic at the back of the presser foot for a "handle", stretch the elastic
a bit to simulate the leg of an exercise leotard or swimsuit.
Note: This is the same procedure used to do a turned waistband, using wider elastic.
• Sew the elastic to the fabric keeping the edge of the elastic and the edge of the fabric together.
• If stopping midway, place the needle down to hold the elastic and fabric in place.
• Fold the elastic to the wrong side and overstitch the elastic from the right side using Running
Stitch #7/green with a length of 1mm.
• Adjust stitch length if elastic stretches out as it is sewn.
BERNINA
M
Y
ASTERING
OUR
TURNED UNDER ELASTIC
Fabric:
Lycra - cotton or nylont, 6" x 5"
9" of cotton swimwear elastic, ½" wide
Needle:
80/12 Universal
Thread:
All-purpose sewing thread
Presser Foot:
Reverse Pattern Foot #1
1/10/02
®
BERNINA
®
Electronic 1008
Electronic 1008/46

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents