Blind Hem - Bernina Electronic 1008 Owner's Workbook

M
ASTERING
Y
OUR
BERNINA
®
Owner's manual pg.___
• Finish one 6" edge of the fabric following the steps of the previous exercise.
• Fold a 2" hem to the wrong side of the fabric and press.
• Attach Reverse Pattern Foot #1.
• Baste the hem in place, sewing about ¼" from the raw edge.
• Select the Blindstitch #3/green (SW 3mm and SL 2.25mm); attach Blind Hem Foot #5.
• Fold hem back to the right side over the basting line.
• Sew on the extended hem allowance, keeping the folded edge next to the guide on the foot.
• Adjust the stitch width if needed so that the needle barely stitches into the fold.
• Mount the sample with the edges folded back as shown in the drawing.
BERNINA
M Y
ASTERING OUR
BERNINA

BLIND HEM

Fabric:
Needle:
Thread:
Presser Foot:
1/10/02
®
®
Electronic 1008
Heavy Flannel – 6" x 7"
80/12 Universal
All-purpose
Reverse pattern Foot #1 and
Blind Hem Foot #5
Electronic 1008/25