Table of Contents
Advertisement
Chapter 1. The System x3250 M3 server
This Installation and User's Guide contains information and instructions for setting
up your IBM System x3250 M3 Type 4251, 4252, or 4261 server, instructions for
installing some optional devices, and instructions for cabling, and configuring the
server. For removing and installing optional devices, diagnostics and
troubleshooting information, see the Problem Determination and Service Guide on
the IBM System x Documentation CD, which comes with the server.
The IBM
model server for high-volume network transaction processing. This
high-performance, dual-core or quad-core server is ideally suited for networking
environments that require superior microprocessor performance, input/output (I/O)
flexibility, and high manageability.
Performance, ease of use, reliability, and expansion capabilities were key
considerations in the design of the server. These design features make it possible
for you to customize the system hardware to meet your needs today and provide
flexible expansion capabilities for the future.
The server comes with a limited warranty. For information about the terms of the
warranty and getting service and assistance, see the printed Warranty Information
document that comes with your server.
The server contains IBM X-Architecture
performance and reliability. For more information, see "What your server offers" on
page 8 and "Reliability, availability, and serviceability" on page 11.
You can obtain up-to-date information about the server and other IBM server
products at http://www.ibm.com/systems/x/. At http://www.ibm.com/support/
mysupport/, you can create a personalized support page by identifying IBM
products that are of interest to you. From this personalized page, you can subscribe
to weekly e-mail notifications about new technical documents, search for information
and downloads, and access various administrative services.
If you participate in the IBM client reference program, you can share information
about your use of technology, best practices, and innovative solutions; build a
professional network; and gain visibility for your business. For more information
about the IBM client reference program, see http://www.ibm.com/ibm/
clientreference/.
The server supports two 3.5-inch simple-swap SATA hard disk drives, two 3.5-inch
hot-swap SATA or SAS hard disk drives, or four 2.5-inch hot-swap SAS hard disk
drives (depending on your model).
Note:
Note: The illustrations in this document might differ slightly from your hardware.
The following illustration shows the 2.5-inch hot-swap SAS server model.
1. Racks are marked in vertical increments of 1.75 inches each. Each increment is referred to as a unit, or a "U". A 1U-high device is
approximately 1.75 inches tall.
© Copyright IBM Corp. 2011
®
System x3250 M3 Type 4251, 4252, or 4261 server is a 1U-high
v Simple-swap SATA hard disk drives support AHCI mode.
v Simple-swap models only support ServeRAID-BR10il adapter.
®
technologies, which help increase
1
rack
1
Advertisement
Table of Contents
