Compaq ProLiant 1850R Configuration Manual page 9

Ordering and configuration guide for the proliant cluster for netware 4.2

Hide thumbs Also See for ProLiant 1850R:

8. Order Compaq Fibre Channel Storage options as needed.

Order hard drives, cabling, and redundant power supplies as per your requirements. The RAID

Array 4000 Redundant Controller can also be ordered. This option enables you to configure a

dual redundant Fibre Channel loop, and includes an additional Fibre Channel Array Controller,

two GBIC-SW Connector Kits, and a Fibre Channel cable. Also, be sure you have the correct

drivers and firmware for the Redundant Controller option. The Redundant Controller option

requires Fibre Channel Array Controller firmware version 2.34 or higher on both controllers, and

NetWare drivers CPQFC.HAM version 2.00 and CPQFC.CDM version 1.30 (found on Smart

Start 4.30 and Novell Software Support Diskettes (NSSD) 5.10A)

9. Order additional NICs for LAN connections as necessary.

10. Order other server options as needed.

0095-0699-A

Table of Contents