Dell 8 Update Manual page 6

The following table illustrates the I/O module port mapping for full-height
blades with quad-port mezzanine cards. The following notations are used
in the table:
• n denotes a variable value from 1 to 8
• LOM1 and LOM2 are the LOM ports of blade n and LOM3 and LOM4
are the LOM ports of blade (n+8)
NOTE:
For a detailed mapping of each PowerEdge system, see the document
Quadport Capable Hardware For the M1000e Modular Chassis on
support.dell.com/manuals.
Table 1-2. I/O Module Port Assignments—Full-Height Blades
Blade n and Blade (n + 8)
Integrated LOM1
Integrated LOM2
Integrated LOM3
Integrated LOM4
Mezz_FAB_B_Blade n_Port1
Mezz_FAB_B_Blade n_Port2
Mezz_FAB_B_Blade n_Port3
Mezz_FAB_B_Blade n_Port4
Mezz_FAB_C_Blade n_Port1
Mezz_FAB_C_Blade n_Port2
Mezz_FAB_C_Blade n_Port3
Mezz_FAB_C_Blade n_Port4
6
Information Update
A1 B1
Port n
Port
(n+8)
Port n
Port
(n+16)
I/O Module
C1 C2
Port n
Port n
Port
(n+16)
Port
(n+16)
B2 A2
Port n
Port
(n+8)
Port n
Port
(n+16)