Cisco MCS-7825-H3-IPC1 Service Manual page 699

Chapter 7 Cisco Management Information Base
STATUS current
DESCRIPTION
The current state of ccmGatewayTable. The initial value of this object is 0 and it will be incremented
every time when there is a change (addition/deletion/modification) to the ccmGatewayTable. This
value and ccmCallManagerStartTime should be used together to find if the table has changed or not.
When the call manager is restarted, this will be reset to 0.
::= { ccmGlobalInfo 24 }
ccmCTIDeviceTableStateId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The current state of ccmCTIDeviceTable. The initial value of this object is 0 and it will be
incremented every time when there is a change (addition/deletion/modification) to the
ccmCTIDeviceTable. This value and ccmCallManagerStartTime should be used together to find if
the table has changed or not. When the call manager is restarted, this will be reset to 0.
::= { ccmGlobalInfo 25 }
ccmCTIDeviceDirNumTableStateId OBJECT-TYPE
SYNTAX Integer32 (0..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The current state of ccmCTIDeviceDirNumTable. The initial value of this object is 0 and it will be
incremented every time when there is a change (addition/deletion/modification) to the
ccmCTIDeviceDirNumTable. This value and ccmCallManagerStartTime should be used together to
find if the table has changed or not. When the call manager is restarted, this will be reset to 0.
::= { ccmGlobalInfo 26 }
ccmPhStatUpdtTblLastAddedIndex OBJECT-TYPE
SYNTAX CcmIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
The ccmPhoneStatusUpdateIndex value of the last entry that was added to the
ccmPhoneStatusUpdateTable. This value together with sysUpTime can be used by the manager
applications to identify the new entries in the ccmPhoneStatusUpdateTable since their last poll. This
value need not be the same as the highest index in the ccmPhoneStatusUpdateTable as the index
could have wrapped around. The initial value of this object is 0, which indicates that no entries have
been added to this table. When the SNMP service is restarted this value will be reset to 0.
::= { ccmGlobalInfo 27 }
ccmPhFailedTblLastAddedIndex OBJECT-TYPE
SYNTAX CcmIndexOrZero
MAX-ACCESS read-only
OL-22523-01
Cisco Unified Communications Manager Managed Services Guide
CISCO-CCM-MIB
7-57