Readconfigurationunknownexception; Readingfilefailure - Cisco MCS-7825-H3-IPC1 Service Manual

Error-Level Alarms
correct, it means you have exceeded the capacity of your IME server, and you require another. Once you
have another, you can now split your DID prefixes across two different IME client instances, each on a
different IME server. That will alleviate the quota problem.
Routing List
SDL
SDI
Sys Log
Event Log
Parameter(s)
The DID for which the Publish was attempted(String)
Server name(String)
Current quota(UInt)
Maximum target quota(UInt)

ReadConfigurationUnknownException

An exception is caught while retrieving enterprise parameters value from database at TFTP service
startup. This is usually caused by a failure to access the Cisco Unified Communications Manager
database.
History
Cisco Unified Communications
Release
7.0(1)
Facility/Sub-Facility
CCM_TFTP-TFTP
Cisco Unified Serviceability Alarm Definition Catalog
System/TFTP
Severity
Error (3)
Recommended Action
In Cisco Unified Serviceability, enable Detailed level traces in the Trace Configuration window for
TFTP and Cisco Database Layer Monitor services. Also, use RTMT to look for errors that may have
occurred around the time of the alarm.

ReadingFileFailure

CMI failed to read SMDI messages from the serial port.
Cisco Unified Communications Manager Managed Services Guide
6-178
Chapter 6 Cisco Unified Serviceability Alarms and CiscoLog Messages
Action
Name changed from kReadConfigurationUnknownException.
OL-22523-01