Electrolux E46GC67ESS - 46" Sealed Burner Gas Cooktop Installation Instructions Manual page 8

8
Preparing for Installation
IMPOR IMPORT T T T T ANT IMPOR
IMPOR IMPOR
•
•
•
•
•
•
•
•
•
A
Figure 1
13"
(330mm)
Maximum
30"
(762mm)
Minimum
3 1/8"
(79mm)
Clearances to Combustibles
Figure 2
1/4" (6mm)
Mimimum clearance
to combustible
surfaces
B
Under Cabinet Clearances
ANT ANT ANT
ANT
When installing the cooktop into a laminated (Formica, etc.) or synthetic (Corian,
etc.) countertop, radius the corners of the cutout to prevent cracking of the
countertop.
Follow the countertop manufacturer's instructions regarding the minimum corner
radius, use of heat reflective tape, reinforcement of corners, etc.
If cabinet storage space is to be provided directly above the cooktop, the risk of
personal injury may be reduced by installing a ventilating hood that projects
horizontally a minimum of 5 inches beyond the face of the cabinets.
Allow a minimum 1/4 inch clearance between the bottom of the any cooktop
chassis and all combustible surfaces, including the upper edge of a drawer
installed below the cooktop. See Figure 1 and related table.
Access to the underside of the cooktop and the junction box must be provided for
inspection and service.
A fixed shelf should not be installed below the cooktop.
Clearance inside the cabinet must allow for proper side mounting bracket
installation. See Figure 2 and related table.
All models are designed for 24" (610mm) minimum base cabinet depth.
The maximum depth of cabinets installed above cooking tops is 13 inches
(330mm).
Plan the installation so that the electrical connection, gas
shut-off valve, and pressure regulator are accessible from the
front of the cabinet.
18"
(457mm)
Minimum
Model
E30GC64ESS
E36GC65ESS
E46GC66ESS/67ESS
Model
E30GC64ESS
E36GC65ESS
E46GC66ESS/67ESS
"A" Minimum "A" Maximum
30" (762mm) 36" (914mm)
36" (914mm) 42" (1067mm)
48" (1219mm) 54" (1372mm)
"B" Minimum
29" (737mm)
35 1/4" (895mm)
46" (1168mm)