Deleting Files; Displaying Users - Cisco GSS-4492R-K9 Administration Manual

Chapter 2 Managing the GSS from the CLI

Deleting Files

Displaying Users

OL-10410-01
To securely copy files from another device to a GSS device that you are currently
logged in to, enter:
gssm1.example.com# scp <file-name of the GSS>
username@remote-host:target-path
The GSS allows you to remove a specific file (startup-config, logs, or archive file)
stored on hard disk. You may want to remove older files or files that you no longer
use from the GSS. To delete files from your GSS, use the del command.
The syntax for this command is as follows:
del filename
The filename argument identifies the name of the file in the GSS file directory.
For example, to delete the oldtechrept.tgz file, enter:
gssm1.example.com# del oldtechrept.tgz
You can display the username and permission status for a specific user or for all
users of the GSS device as follows:
Use the show user username command to display user information for a
•
particular user. The username argument identifies the name of the GSS user
that you want to display information for.
Use the show users command to display information for all GSS users.
•
To display information for a particular user, enter:
gssm1.example.com#show user paulr-admin
Username permission
-------- ----------
paulr-admin admin
To display information for all users, enter:
gssm1.example.com# show users
Username permission
-------- ----------
Cisco Global Site Selector Administration Guide
Displaying Users
2-23