Insert/Remove An Sdhc/Sd Memory Card - Panasonic WVSF332 - IP NETWORK CAMERA Installation Manual

Insert/remove an SDHC/SD memory card

Important:
• Before inserting the SDHC/SD memory card, turn off the power of the camera first.
• When inserting an SDHC/SD memory card, make sure the direction.
• Before removing the SDHC/SD memory card, select "Not use" for "SD memory card" on the
[SD memory card] tab of the setup menu first. Turn off the power after "Not use" selection, and
then unload the SDHC/SD memory card. When the SDHC/SD memory card is inserted or
removed with the power on, data in the SDHC/SD memory card may be damaged.
(☞ Operating Instructions (PDF))
z
Detach the dome cover. (☞ Page 18)
x
Insert an SDHC/SD memory card fully into the
SDHC/SD memory card slot.
c
Attach the dome cover. (☞ Page 34)
v
When removing the SDHC/SD memory card
from the SDHC/SD memory card slot, detach
the dome cover (☞ page 18), and push the
card until the lock is released. After removal,
attach the dome cover. (☞ Page 34)
22
SDHC/SD memory card slot
Dome cover
Dome cover fixing screw
(M3, step screw)