Advertisement
Thank you for purchasing the KA-F5601U SDI output card.
Mounting this card on KY-F560 Camera
Slot cover
Slot
Screw Å
6
By inserting this card into JVC's color video camera
KY-F560, camera images could be output as serial
digital video signal (SMPTE 259M compliant).
SDI output
terminal
FY-F560 power must be switched off before mounting
the card.
1.
Remove 2 screws Å from the rear of the camera
and take out the slot cover.
Screw Å
This card
2.
Insert this SDI output card into the slot at the rear of
the camera and secure it by screwing back the 2
screws Å which were taken out earlier in the above-
mentioned step
Ensure that the SDI output card is inserted all the
way in.
Note to be taken after mounting KY-F560
To avoid causing malfunction, please do not touch the
SDI output terminal except when connecting cable to it.
SDI
output
terminal
1.
.
Note
Advertisement
