Canon VB-C300 Administrator's Manual page 266

Messages List
Shared layout sequences may not contain
Layout
personal layouts. The following layouts
Sequence
must be removed before the layout can be
dialog
saved as a shared layout sequence :
The analysis frame rate must be between
'<fps>' and '<fps>'.
Motion The recording frame rate must be between
Detection '<fps>' and '<fps>'
Settings dialog
The pre-event time must be no greater than
30.
Normal or
Special Day Recording settings for camera servers on
Schedule the storage server '<storage server name>'
window and will not be available.
Add/Edit <Communication Error Messages -
Camera Details>
Server dialog
This will replace the current layout. Are you
sure?
You cannot delete
'<layout name>'
because it is the current layout or it
contains the current layout or layout
sequence.
Are you sure you want to delete the
selected layout?
Organize
<layout name>
Layouts &
Are you sure you want to delete the
Layout
Sequences selected folder, including layouts and
dialog layout sequences within the folder?
<layout name>
Are you sure you want to delete the
selected layout sequence?
You cannot delete
'<layout name>'
because it is the current layout sequence.
You cannot overwrite
'<layout name> '
because it is used by the current layout
sequence.
9-24
Messages Cause
An attempt was made to change the layout
sequence that contains a personal layout
sequence to a shared layout sequence.
An invalid value was selected for the
motion detection frame rate.
An invalid value was selected for the
motion detection recording frame rate.
[OK] was pressed after configuring a value
exceeding 30 seconds for the pre-event
time value.
An error occurred while connecting to the
Storage Server, when the Normal or Special
Day Schedule window is opened or the
Storage Server in the Recording Schedules
window is changed. Or, a communication
error occurred when you were adding/
editing a Storage Server.
There is a layout with the same name in the
destination to which the layout is moved
and the name is the same as the layout that
is being currently used.
An attempt was made to delete the current
layout or the folder that contains the current
layout or layout sequence.
An attempt was made to delete a layout
that is not currently being used.
An attempt was made to delete the layout
folder.
An attempt was made to delete the layout
sequence.
An attempt was made to delete a layout
that is registered in the current layout
sequence.
An attempt was made to change or
overwrite the layout that is being used in
the currently active layout sequence.