Canon VB-C300 Administrator's Manual page 114

Set Normal Schedule
Select a day of the week to record video
In the [Repeat on] area, check the days you wish to repeat the recording period you have set in the [Times]
area above.
Note
If you have defined any special day schedules, at that time the schedules will override normal schedule
times for the whole day.
Times are given in 24 hours.
If Camera Server has been configured with [Service time restricted], VK-64/VK-16 will not be able to
record from the Camera Server during restricted times.
The time zone used for the recording schedule will be the time of PC where the Storage Server is running.
The Storage Server will adjust for Daylight Savings if configured in the operating system.
Set Continuous Recording
1. Click the [Continuously at Max.] box if you want to set continuous recording for the duration of the time
period.
2. Select a frame rate for recorded video from the drop-down menu, or input a value from the keyboard.
You can set the frame rate from 0.1 frames per second to 30 frames per second. The default is 5 frames par
seconds. The upper limit is 5 frames per second with VK-Lite.
See P. 4-45 for details of Continuous Recording.
Configure Motion Detection Recording and Sensor Recording Settings
1. Check the [On motion detection] box if you want recording activated when motion is detected during this time
period.
2. Check the [On sensor event] box if you want recording activated from a sensor event during this time period.
3. Click [Settings] to change the details.
See P. 4-45 and P. 4-53 for details of Motion Detection and Sensor Event recordings.
4-34