Philips DS9800W/37 User Manual page 14

WPS
Tip
•
To change the name of the SoundSphere speakers
for AirPlay, proceed with steps 2 to 7 in 'Scenario 2:
Connect to a non-WPS router' below.
•
For some wireless routers, you may need to hold the
WPS button for WPS connection. See the user manuals
of the specific routers for details.
Scenario 2: Connect to a non-WPS
router
You can connect the speakers to a non-WPS
router through
• an iOS 4.2 (or later) enabled iPod
touch/iPhone/iPad
• a Wi-Fi enabled PC or Mac installed
with iTunes 10
Connect DS9800W to your iPod
touch/iPhone/iPad or PC/Mac
1
Press and hold WiFi SETUP on the back of
the main speaker for more than 5 seconds.
»
The LED indicator blinks in green and
yellow alternately.
2
Wait for about 45 seconds so that Philips_
Fidelio_AirPlay is available in the list of
Wi-Fi networks.
3
Select Settings -> Wi-Fi on your iPod
touch/iPhone/iPad.
• Or enter the list of available wireless
networks on your PC/Mac.
EN 15