Set Up A Wi-Fi Network For Airplay; Connect Speakers To A Wi-Fi Network; Router - Philips DS9800W/37 User Manual

4 Set up a Wi-
Fi network for
AirPlay
Note
•
Some operations may vary as you use different types of
wireless routers.
The SoundSphere speaker system is compatible
with the following iPod/iPhone/iPad models:
• iPad 2
• iPad
• iPhone 4
• iPhone 3GS
• iPod touch (2nd, 3rd, and 4th generation)
Before setup of the Wi-Fi network, check
the points below.
1
Make sure that the wireless router is
powered on and working properly.
2
Make sure that the LED indicator on the
back of the main speaker blinks in green
slowly.
3
Check the type of the wireless router you
use.
14 EN
Connect speakers to a Wi-Fi
network (router)
Select a scenario below that matches your
router type.
Note
•
Each time when the speakers are powered on again,
the speakers enter the latest configured Wi-Fi network
automatically.
•
In case of setup failure, repeat the steps, or press and
hold on the back of the main speaker and try again.
Scenario 1: Connect to a WPS-PBC

router

1
Press WiFi SETUP on the back of the main
speaker.
»
The LED indicator blinks in red, green
and yellow alternately.
2
Press the WPS button on the wireless router.
»
After a while, the LED indicator stops
blinking and stays green, and the main
speaker beeps.
»
The speakers join the Wi-Fi network
successfully.
WIFI
SETUP