Water Tank - Hunter 37205 Manual

1. Remove the Care Free
from its packaging.
. Select a location for your humidifier. The
location should be flat, hard, water-resistant,
and at least six (6) inches away from walls
and sources of heat. Mount the humidifier
on a drip tray if you are using the unit on a
wood surface or other surface which could
be damaged by accidental water spillage or
condensation.
hunTeR WILL noT accePT ReSPonSIBILITY
FoR daMaGe due To WaTeR SPILLaGe.
3. Place the Base in the location you selected.
Take the Water Tank to a sink or tub to fill
with water.
4. Unscrew the Tank Cap by twisting it
counterclockwise and fill the Water Tank with
cool water.
noTe: When the Water Tank is empty, the refill
indicator icon will turn ON and the unit will stop.
You must press the RESET button after refilling the
Water Tank to reactivate the unit.
5. Replace the Tank Cap by screwing it clockwise
onto the Water Tank.
42999-01 06/07/2006
42999_EngFr_WM Dig Humid.indd 4
Warm Mist Humidifier
®
6. Place the Water Tank back onto the Base.
Make sure the Water Tank is properly seated
on the Base or the humidifier will not work
properly.
Base
hunTeR WILL noT accePT ReSPonSIBILITY
FoR daMaGe due To WaTeR SPILLaGe.
7. Make sure the Power Button is set to OFF and
plug the humidifier into the wall outlet.
cauTIon: never plug in the humidifier
while your hands are wet, as electric shock
could occur.
noTe: Let the humidifier sit for one minute
after refilling the tank, before turning the
power back ON.
8. Push the Power Button to turn the humidifier
ON. Adjust the setting as needed.
4
Water
Tank
© 2006 Hunter Fan Company
6/7/06 1:25:21 PM