Please read all these instructions before operating this product and retain them for future reference. Earlex Ltd will accept no responsibility for the use of this product if used for any other purposes than those detailed herein.
Page 2
Use genuine Earlex parts only. Stay alert - Watch what you are doing. Use common sense and do not operate tool when you are tired.
Vibration level: 12 m/s 2 PLEASE NOTE We have done all we can to ensure that used correctly and according to these instructions, the Earlex Electric Airless Spray Gun will give long trouble free service. We accept no responsibility for damage...
TECHNICAL SPECIFICATION MODEL ASG100 MODEL ASG120 Power Supply Power Supply 230V 50Hz ~ 230V 50Hz ~ Rated Input Rated Input 100 Watts 120 Watts Container Capacity Container Capacity 1.0 Itr 1.0 Itr Spray Gun weight Spray Gun weight 2.0 kg 2.0 kg Cable length Cable length...
Page 5
USING THE VISCOSITY CUP Dip the viscosity cup into the paint (or other medium) to fill it. Time how long the paint takes to empty from the cup (see fig.1) & refer to the viscosity guide on page 4 to compare the time. Thin the paint further until the recommended time is achieved. fig.1 PREPARING &...
SETTING UP THE SPRAY GUN FOR OPTIMUM PERFORMANCE When setting up the spray gun we recommend that you spray the paint MAXIMUM MINIMUM onto some scrap material, newspaper or cardboard. Purge the air from the spray gun by running it for a few seconds until the paint comes out of CONTROL KNOB the gun.
SPRAY NOZZLE SELECTION The ASG100 spray gun is supplied with 0.6mm and 1.0mm nozzles, the ASG120 spray gun is also supplied with a 0.8mm nozzle, these should be used as follows: 1) 0.6mm - This size works best for oil-based materials, stains, sealers, lacquers, water-proofers and enamels for small application areas.
Page 8
REMOTE PICK UP SYSTEM - (ASG120 only) For larger painting tasks, use the Remote Pick Up System. This enables you to draw paint directly out of a large can instead of using the paint container supplied with the spray gun, thereby saving considerable time and making painting an even easier job.
A worn valve will cause a poor spray pattern and will require replacing. Replacement valves are available from the Earlex Service Department. You will need to check the spray nozzles, piston and spring from time to time to check for wear.