Section 4 : Other Speaker Features - Creative ZiiSound D5x Manual

4.1
Returning to standby and Powering On the D5x with active Links
Returning to Standby
A
The Linked speakers can be brought to Standby in unison by pressing the Power ON/Standby
Button located at the rear of the RIGHT Master speaker.
Powering ON with active links
B
The Linked speaker can be Powered ON with active links to each other by pressing the Power
ON/Standby Button of the RIGHT Master speaker with the mains powered ON on all the other
speakers.*
*Powering ON with active links can only be done on the Master speaker as the slave speakers are listening to instructions
from the Master speaker, even in standby.
4.2
Disabling / Restoring the link system for Standalone/ Linked
Disabling the LINK for individual D5x operation
A
You can disable the LINK connection to all the linked speakers by simply pressing the LINK
Touchpad / Button once on the RIGHT Master speaker. This will bring down the LINK and restore
the functions of the Volume control, AUX-IN, CONNECT Touchpad and Volume Touchpad / Button,
which locked in link mode, back to each individual D5x. Once activated, there is no LED indication
on the LINK LED status indicator for all D5x.
Multi-Channel
Party mode

Section 4 : Other speaker features

speaker usage
(only for 2.0 and above setup)
Standalone
19