Advertisement
Enjoy your favourite music from another paired Bluetooth device by following these steps to establish
the connection.
Action
_
Press "CONNECT Touchpad / Button" once
Section 2 : Linking with another ZiiSound D5x or DSx Wireless subwoofer
2.1
Adding a subwoofer to the D5x to form a 1.1 speaker system
A
Note: It is neccessary to clear the memory of linked speakers (all D5x(s) and DSx) should you
require to configure a new setup. (For example, adding another D5x or DSx)
Proceed to Step (b) if your D5x or DSx have not been linked with other speaker before.
If your D5x or DSx have been linked before, follow the instruction below to clear link system
memory to reconfigure a new speaker setup.
For the D5x(s)
Ensure the speaker is in standby mode. Press and hold the Power ON/ Standby button located at
the rear of the speaker until LINK and CONNECT LED blinks 2 times and goes off. The D5x Link
memory has been cleared.
For the DSx
Press and hold the LINK Button located at the rear of the subwoofer for 10 seconds until the Link
LED blinks 2 times and goes off. The DSx Link memory has been cleared.
1.7
Switching between paired devices
LED status
_
CONNECT LED blinks and
stays lit
Status
Ensure that the next
previously paired device has
Bluetooth powered on and
ready to accept connection
Bluetooth connection
switches. Ready to stream
music.
11
Advertisement
