AOC 2212PH User Manual page 10

FRONT PANEL CONTROL
•
:
Power Button
Press this button to switch ON/OFF of monitor's power.
•
MENU / ENTER :
Active OSD menu or function adjust confirm or Exit OSD menu when in
Contrast /Brightness OSD status.
•
< / Volume- , > / Volume+ :
Activates the volume control when the OSD is OFF or navigate
through adjustment icons when OSD is ON or adjust a function
when function is activated.
.
•
:
Input Select
Select the VGA / DVI/YPBPR or HDMI function.
• Power Indicator:
Green — Power On mode.
Orange —Off mode.
• Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu).
2. When OSD menu is in off status, press this button to activate the Auto
Adjustment function.
The Auto Adjustment function is used to optimized the HPos, VPos,
Clock and Focus.
OSD Lock Function: To lock the OSD, press and hold the MENU button
while the monitor is off and then press power button to turn the monitor on. To
un-lock the OSD - press and hold the MENU button while the monitor is off
and then press power button to turn the monitor on.
NOTES
•
Do not install the monitor in a location near heat sources such as radiators
or air ducts, or in a place subject to direct sunlight, or excessive dust or
mechanical vibration or shock.
•
Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally
packed at the factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene, or
abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
9