Motion Area Setup - Encore ENXDVR-4C User Manual

3.6.7 Trigger Full Screen
When activated the channel that detected movement will be maximized to fill
the whole screen.
OFF": It will not display in full screen when the channel is triggered. Also,
"
the trigger area will turn to "red-color"
3.6.8 Trigger Type
Initial Trigger and Continuous Trigger are available.
Initial Trigger: timing starts when the first movement is detected, and stops
when the allotted time is finished. Recording will start again if more movement
is detected.
Continuous Trigger: timing starts when the first movement is detected, but the
amount of recording time elapsed is reset every time more movement is
detected.

3.6.9 Motion Area Setup

Select the motion detection area. This must be set for motion detection to work.
If not set, no motion detection will occur.
Use ( ), ( ),
save.
28
( ), ( ) to adjust the area. Press "
ENXDVR-4C
4 Channel Surveillance DVR with 4 Cameras
USER'S MANUAL
www.encore-usa.com
" or right-click to