3.3 Main Menu
Press
then enter the password to enter the main menu. Default password is
"123456". Press
The main menu appears as shown below.
•
Channel Setup: selects the channel to change the settings for. Select "All"
to set the settings the same for all channels.
•
Record Setup: sets the recording status
•
Detector Setup: sets the channel to detect and the detection/sensor status
•
System Setup: sets up most of the system options
•
Hardware Setup: for updating the firmware, setting up the hard drive,
display and audio
•
Language Selection: selects the language for the system menus
•
Exit Main Menu: exits the main menu
18
to exit the password dialog.
ENXDVR-4C
4 Channel Surveillance DVR with 4 Cameras
USER'S MANUAL
www.encore-usa.com