Kenmore 3103 - Elite 30 in. Slide-In Gas Range Use And Care Manual page 22

Setting Oven Controls
Setting Bake
The BAKE B_'ke_ }} pad controls normal baking. If preheating is necessary, refer to the _ Preheat Feature for
instructions. The oven can be programmed to bake at any temperature from 170 ° F to 550 ° F (the sample shown below
is for 350°F).
INSTRUCTIONS PRESS DISPLAY
To set the Bake Temperature to 375°F
1. Arrange interior oven racks and place food in oven.
J............ 350"
2. Press Bake, will appear and "BAKE" will flash in the
\, ,,.j,
display(Figure 1). If a bake of 350°F is needed, press
3. Press (_ _ _ (Figure 2). "BAKE" will continue to flash
and "375 °'' will appear in the display.
4. Press :START':: The actual temperature will be displayed (Figure
3). A beep will sound once the oven temperature reaches 375°F
and the display will show "375 °" and "BAKE" (Figure 4).
Pressing _TO_ will cancel the Bake feature at any time.
To change the Bake Temperature (example: changing
from 375°F to 425°F)
1. After the oven has already been set to bake at 375°F and the
oven temperature needs to be changed to 425°F, press Bake
J
(Figure 5) and "375" will appear and "BAKE" will flash in the
display.
2. Press _ _'_ _ (Figure 6). "BAKE" will continue to flash
and "425 °" will appear in the display.
3. Press
Note: After 6 minutes of the first rise of temperature, the convection
fan will be activated to allow the oven to reach its target temperature
faster. The Bake and Broil burners and the Convection element will
also cycle for a better heat distribution.
O(2>Q
@
Q(Z)d >
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
22