Table of Contents
Advertisement
The Amplifier menu diagram
2.3.1
Output attenuation
The illustration below shows the Output attenuation screen. You can choose to set CH1, CH2 or both by
pushing the "C1+2" button. The "+" and "-" buttons change the value of the output attenuation in the range
from 0 to -30dB. Note: for the best sonic performance it is recommended that you set the attenuation
to 0db (no attenuation), and select the proper gain/sensitivity from the following menu.
14
All material © 2010 Martin Audio Ltd. Subject to change without notice
Advertisement
Table of Contents
