Gate Ch1 - Ch2; Keth; Bar Meters - Martin Audio MA18K - 2010 User Manual

digital system controllers. In such cases it is mandatory, to correctly set the parameters in the
external device.
2.3.7

Gate CH1 - CH2

This function allows muting of the amplifier channels individually if the input signal amplitude is falling below
the values shown in the following table. You can enable/disable the gate by pushing the on/off button. Gating
the output is delayed by 5 seconds after input signal removal, and follows in reversed way the bottom green
LED on the CH1, CH2 bar LED display *(muted if green LED is off).
2.3.8

KETH

This section is not currently implemented.
2.3.10

Bar meters

In the Bar meters screen you can select the LED bargraphs to operate as output voltage meters and the
LCD bargraphs in the main screen as output current meter (by selecting "LED Volt, LCD Curr), or vice versa
(by selecting the other option).
All material © 2010 Martin Audio Ltd. Subject to change without notice
16