Dsp Features; Dsp Submenu - Martin Audio MA12K - 2010 User Manual

3.9

DSP features


AES3 digital input

high performance (128 dB SNR) analogue input

high performance (122 dB SNR) analogue output

latest generation SHARC DSP with 40 bit floating point signal path for noiseless processing

enhanced IIR filtering routine optimized for the highest SNR

up to 2 seconds of main delay

PEQ16: fully parametric equalizer, 16 band, each with 8 different filter shapes (peaking, hi/lo
shelving, hi/lo pass EQ, band pass, band stop, all pass)

alignment delay with high temporal resolution

crossover with IIR Butterworth, Bessel and Linkwitz-Riley filters

advanced crossover with FIR linear phase brick-wall filters

speaker and amplifier monitor and analyzer to estimate power and load impedance

peak limiter with look-ahead

true power limiter to avoid burning voice coils while getting the maximum performances from drivers

patented damping control and cable resistance compensation: get optimally damped bass response
regardless of cable length
3.10

DSP Submenu

All material © 2010 Martin Audio Ltd. Subject to change without notice
24