Lifetime the operating time of the amplifier
2.3.15 Hardware monitor
In this screen you can view some information about the system parameters:
PWRBSCH1 - PWRBSCH2 amplifier power supply voltages channel 1-2
VAUX internal auxiliary voltages
If you push the "more" button, you can view the others parameters:
+5VAN auxiliary analog voltage
VEXT external remote control voltage
VAUX if the "OK" written is displayed, auxiliary voltages of power supply are correct.
IGBTCONV if the "OK" written is displayed, the DC/DC converter monitor function properly
192KHZ if the "OK" written is displayed, the frequency system clock is right
2.3.16 The Smartcard function
The Smartcard operates as memory and can save the settings of the amplifier. These settings can be loaded
into other amplifiers avoiding the manual setup of these. When you insert the smartcard in the slot over the
LCD screen), the screen shown below appears.
You can select the desired option by pushing up or down button and "ok" to activate it. The option "Recall
All material © 2007. Martin Audio Ltd. Subject to change without notice.