Advertisement
<
CONTENTS
6
When connecting loudspeaker systems to an amplifier, it is recommended
that the return resistance of the cable used is less than one tenth of the
nominal impedance of the system or systems in parallel. The table below
gives an indication of the maximum permissible cable runs for various
conductor cross-sectional areas.
Conductor CSA
1.0mm
2
1.5mm
2
2.0mm
2
2.5mm
2
4.0mm
2
6.0mm
2
7
Martin Audio LE12JB monitors are warranted against manufacturing defects
in materials or craftsmanship over a period of 5 years from the date of
original purchase. During the warranty period Martin Audio will, at it's
discretion, either repair or replace products which prove to be defective
provided that the product is returned in its original packaging, shipping
prepaid, to an authorised Martin Audio service agent or distributor.
Martin Audio Ltd. cannot be held responsible for defects caused by
unauthorised modifications, improper use, negligence, exposure to
inclement weather conditions, act of God or accident, or any use of this
product that is not in accordance with the instructions provided by Martin
Audio. Martin Audio is not liable for consequential damages.
This warranty is exclusive and no other warranty is expressed or implied.
This warranty does not affect your statutory rights.
>
PRINT
CABLE LENGTHS
4 ohms
11m
17m
22m
29m
44m
66m
WARRANTY
Martin Audio – LE12JB SERIES MONITOR
Maximum Cable Run
8 ohms
22m
34m
44m
58m
88m
132m
4
GUIDES
16 ohms
44m
68m
88m
116m
176m
264m
Advertisement
