Advertisement
Bearing Splitter Sizes
Push-Puller Legs
Yoke
Hex Drive Lead Screw
Weight
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep the manual and invoice in a safe and dry place for future reference.
WARNING: When using tool, basic safety precautions should always be fol-
lowed to reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1.
Keep work area clean. Cluttered areas invite injuries.
2.
Observe work area conditions. Do not use machines or power tools in damp
or wet locations. Don't expose to rain. Keep work area well lighted.
3.
Keep children away. Children must never be allowed in the work area. Do not
let them handle machines, tools, or extension cords.
4.
Store idle equipment. When not in use, tools must be stored in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children.
5.
Use the right tool for the job. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. There are certain applications for which
this tool was designed. It will do the job better and more safely at the rate for
which it was intended. Do not modify this tool and do not use this tool for a
purpose for which it was not intended.
6.
Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
7.
Do not overreach. Keep proper footing and balance at all times. Do not reach
over or across running machines.
SKU 93980
Specifications
Item
2 and 3 inches
2 sets with 2 extension legs each, 4 and 5
inches
6 inch with center adapter
7 inch x 17 mm (drive) x 14 mm (14 TPI
Acme Thread)
10.6 lbs.
Save This Manual
Safety Warnings and Precautions
For technical questions, please call 1-800-444-3353
Description
Page 2
Advertisement
