PICTURE menu
Remote control
See "Navigating through the MENU" on page 29.
See "Main menu and sub-menu" on page 30.
PICTURE MODE
Depending on the projection environment, you can use
these preset parameter settings to optimise image
projection. Press I H to cycle through the options.
NORMAL
DYNAMIC
COLOR1
COLOR2
NORMAL
DYNAMIC
COLOR1
COLOR2
CINEMA1
CINEMA2
CINEMA3
NOTE:
• It may take for a while until the selected mode is
stabilised.
E
32 -
NGLISH
Control panel
CINEMA3
CINEMA2
CINEMA1
Setting for a general image, such
as sports programme or TV
games
Bright and sharp setting
Setting for HDTV standard in ITU-
R BT. 709 and color temperature
6 500 K at the default setting of
the PICTURE menu items.
Setting for DCDM standard
(SMPTE431-2) and color
temperature 6 300 K at the
default setting of the PICTURE
menu items.
Setting tuned by top Hollywood
colorists
Deeper and more rich color
setting
Vivid and crisp color setting
CONTRAST
You can adjust the contrast of the projected image.
Adjust the BRIGHTNESS in advance if necessary.
Lower
Setting range: -64 to +64
BRIGHTNESS
You can adjust the brightness of the projected image.
Darker
Setting range: -32 to +32
COLOR
You can adjust the color saturation of the projected
image.
Lighter
Setting range: -32 to +32
When COMPUTER signal is connected, only available
with the following signals.
1 125 (1 080)/60i
1 125 (1 080)/60p
TINT
You can adjust the skin tone in the projected image.
More
reddish
Setting range: -32 to +32
When COMPUTER signal is connected, only available
with the following signals.
1 125 (1 080)/60i
1 125 (1 080)/60p
SHARPNESS
You can adjust the sharpness of the projected image.
Less
sharp
Setting range will vary according to the selected input
signal.
Higher
Brighter
Darker
1 125 (1 080)/50i
1 125 (1 080)/50p
More
greenish
1 125 (1 080)/50i
1 125 (1 080)/50p
More
sharp