Configuring The Software For A Server With Multiple Nics; Uninstalling The Software - McAfee EPOLICY ORCHESTRATOR 4.5 Installation Manual

Post-Installation Tasks

Configuring the software for a server with multiple NICs

Configuring the software for a server with multiple
NICs
When you install ePolicy Orchestrator on a server with multiple network interface cards (NICs),
ensure that ePolicy Orchestrator is bound to the appropriate NIC. There are three approaches
to achieving this, depending on the number of IP addresses you want to expose for agent-server
communication.
Task
1 Open the server.ini file. The default location is:
C:\Program Files\McAfee\ePolicy Orchestrator\DB
2 Modify the [server] section of the file by adding the following line:
Server=<IP address of the server you want ePolicy Orchestrator to use>
Follow the procedure that corresponds to the number of IP address you want to expose:
a To expose a single IP address: modify the server.ini file, and insert the IP address
you want to expose.
b To expose all IP addresses: modify the server.ini file, and insert the FQDN of the
ePO server.
c To expose some IP addresses: modify the server.ini file, and insert an IP address
you want to expose. Then, set up a new virtual Agent Handler group to define additional
IP addresses you want to expose for agent-server communication. See the ePolicy
Orchestrator Product Guide for additional information.
NOTE:
for agent-server communication. If these addresses are not provided, the IP address
of the first listed NIC is used.
3 Save and close the server.ini file.
4 Restart all ePO services.

Uninstalling the software

If you need to uninstall ePolicy Orchestrator software, use this procedure. If you used the ePO
Setup program to install SQL 2005 Express, you can remove the database when you remove
ePolicy Orchestrator.
Before you begin
You must uninstall any Agent Handlers registered to this ePO server before you uninstall the
ePolicy Orchestrator.
Task
1 Close all database management software.
2 Open the Control Panel and select Add/Remove Programs.
3 Select McAfee ePolicy Orchestrator, then click Remove. The Remove McAfee ePolicy
Orchestrator dialog box appears.
4 Select Also remove the ePolicy Orchestrator database.
24 McAfee ePolicy Orchestrator 4.5 Installation Guide
The server IP addresses are used for agent access to the master repository and