ENGLISH
Check of the measurement results
1
(Remote control unit)
2
(Remote control unit)
3
(Remote control unit)
4
(Remote control unit)
5
(Remote control unit)
24
Select the items.
The measurement results of each item can be checked here.
A.Set SpConf.Ck
Press the ENTER button and display the verification screen.
[Speaker Config. Check]
NOTE:
• When measurements have been made using the measurement microphone, speakers with a built-in
filter such as subwoofers might be set with a value that differs from the physical distance because of
the internal electrical delay.
If the check ends, press the ENTER button again.
Select from the following three items based on the measurement
results.
• Store : Set with the checked measurement value.
• Retry : Perform the measurement again.
• Cancel : Cancel the checked measurement value.
A.Set
When the "Store" is selected, all parameters are stored up and
switch to the SUBWOOFER MODE setting.
[Delay Time Check]
<Store
[Channel Level Check]