Advertisement
EN 24
5.
LGE PDP 2K6
5.3
Defect Description Form
This form must be used by the workshops for warranty claims:
Defect Description Form LCD PLASMA v4.0 final
To be filled in by WORKSHOP / WORK CENTER
Country:
Customer Account nr.:
Job sheet nr.:
Condition
Symptom(s)
Pixel
Defect(s):
Symptoms
Out of
warranty
Defect Board
Spare Part Nr.
1.
2.
3.
4.
Note 1: The defective LCD-panel / PDP needs to be returned in the same packaging as the new part was send. If not
the warranty claim will be rejected.
Owner: PHILIPS CE EUROSERVICE
Service Modes, Error Codes, and Fault Finding
PHILIPS
LCD & Plasma
DEFECT DESCRIPTION
FORM
Constantly
Intermittently
After a while
No backlight
No picture
Picture too bright
Scratches (LCD only acc.
Pixel criteria sheet V4.0)
Only partial picture
Unstable picture
Qty of dots:
Dark dots
Bright dots
Following defect symptoms are out of warranty:
Broken glass / Broken
-
polarizer
-
Scratch(es) on display /
polarizer
Serial Nr.
Figure 5-45 Defect Description Form (DDF)
Type nr./Model nr. set
Serial nr. set
Type nr. display
Serial nr. display
Part nr display (12nc)
Return number
In hot environment
In cold environment
Flickering / flashing picture
Lines across/down image
Inactive row(s)
Inactive column(s)
Missing colour(s)
Light leakage
Mark
Defect(s):
-
Number of dark/bright pixels within spec.
-
Burn in (Plasma TV) / Sticking image (LCD TV)
-
MURA
New Board
Spare Part Nr.
Date last modified: 28/03/2006
Other:
Other:
These
symptoms
are not
claimable.
Serial Nr.
DE10WEG
F_15590_115.eps
050407
Advertisement
