Table of Contents
Advertisement
Changing the Ink Tank (part 3)
6 6 6 6
Close the maintenance cover.
7 7 7 7
Close the front cover.
Press both edges of the font cover with both of your hands
until it locks.
8 8 8 8
Confirm on the display panel that ink tanks have
been securely set to the unit.
If a message appears, which lets you know that any of ink
tanks have not been installed in their correct positions, open
the front cover and confirm that all the ink tanks are properly
inserted.
9 9 9 9
Follow the message on the operation panel to
complete the ink tank replacement.
Reference:
For more detail, refer to "THE INK TANK" in
the Setup Guide and Operation Manual.
10 10 10 10
Print a test page to check if the unit prints properly.
Click the "Start" button of "Test print head" found in the
"Maintenance" dialog box of the print status window to print
out a test page.
If print quality is poor, return to step 5 and follow the
procedures once more.
If print quality is poor after correctly inserting the ink
tank,
clean the Print
Maintenance
Head.
69
Advertisement
Table of Contents
