Table of Contents
Advertisement
How to Print (part 1)
Follow the steps shown below for basic operation of Copy JX2.
1 1 1 1
Place the document on the original table.
Refer to "MAKING COPIES" in the Setup Guide and
Operation Manual for information on how to set a document
in the unit.
2 2 2 2
Click the "Change Preview" button to display a
scan preview, and click the "Scan Preview" button
( ).
An image as shown below will be displayed in the preview
area.
3 3 3 3
Set the clipping area and scanning preferences.
Reference:
Refer to
to set the clipping area by the mouse, or to
General Setting
basic scanning preferences.
To set more detailed preferences, follow steps 1 and 2 shown
below.
1 1 1 1
To setup more detailed preferences, click the
"Special Setting" button ( ).
Reference:
Special Setting
Scan Preview
for the detail of how
for the detail of how to set
2 2 2 2
If you want to insert a watermark, click the
"Watermark" button ( ).
When the watermark setting dialog box in the printer
driver opens, specify your choice of required
preferences.
Reference:
Refer to the
details on the Watermark setting dialog
box.
Click the "Clear All" button to return all settings to the
default settings.
4 4 4 4
Click the "Change Preview" button to specify the
desired print position on the output.
Reference:
Print Margin Settings
Copy JX2
"Watermark" Tab Settings
50
for
Advertisement
Table of Contents
