Windows-Specific Operating System Features - Pentax 206627 - PocketJet 3 Plus User Manual

Windows-Specific Operating System Features

Windows 2000/XP Notes:
1) Paper Type Control – Select Cut Sheet, Roll, or Perforated Roll.
This modifies the printable area of all paper sizes (Letter, Legal,
A4, and Custom).
2) Using Custom Forms
a.
b. On the Forms Page, create a form for use with custom
c.
d. All forms created within these specifications will be
Windows CE Notes:
1) Serial Handshake – Used with Serial models only. Choose
Hardware or Software handshake based on the way the serial
port is configured in the Configuration utility.
2) Port Buffer Size – Controls the largest block of data sent to the
printer port at one time. Set this to the largest value that works
reliably on your CE device (larger=faster).
3) Perforated Paper – Modifies the printable area to assure proper
function when using perforated paper.
4) Display This Dialog When Printing – If "on", settings may be
changed for every print job. To be sure the same settings are
always used, set this to "off." It may be turned "on" again using
the Control Panel.
Select Start:Settings:Printers: select Server Properties.
paper size.
Allowed sizes:
•
Minimum width = 4" (10.2 cm)
•
Maximum width = 8.5" (21.6 cm)
•
Minimum height = 2.00 " (5.1 cm)
•
Maximum height = 65,535 print lines.
displayed as paper size options.
Page 13