A.O. Smith Hot Water Storage Tanks T120V Specifications

FEATURES
A.O. Smith storage tanks are ideal for use with
gas-fired copper heat exchanger equipment for
storage of any potable water at temperatures of
180°F (82°C) or lower.
GLASS-LINED TANK - Alkaline borosilicate
composition permanently fused to steel by firing
at a temperature of 1600°F (870°C), providing
years of corrosion protection and dependable
use.
MAGNESIUM ANODES - For extra protection.
THREADED OPENINGS - All tanks furnished
with threaded openings for thermometer,
tankstat, drain valve, relief valve plus 2" NPT
recirculation lines.
SMALL FOOTPRINT - Compact. Fits through
30" door.
WORKING PRESSURE 150 PSI (1030 kPa)
HANDHOLE CLEANOUT - Standard on T200V.
OPTIONS
Perfectly balanced manifold kits allow installation
where up to 4 tanks are required.
Insulation kits for field installation.
May 2000
VERTICAL
HOT WATER STORAGE TANKS
T120V, T200V
L
W
(ON ASME CONSTRUCTED TANKS)
LIMITED WARRANTY OUTLINE
If the tank should leak any time during the first
three years, under the terms of the warranty,
A. O. Smith will repair or replace the tank;
installation, labor, handling and local delivery
extra. THIS OUTLINE IS NOT A WARRANTY.
For complete information, consult the written
warranty or A. O. Smith Enterprises Ltd.
CRN
A 408.0C