Solving Application Problems - Brother GT-541 Instruction Manual

7. Troubleshooting

7-3. Solving Application Problems

Problem
The image sent from Adobe
Illustrator 10 is printed 90 degree
rotated.
The image sent from Adobe
Illustrator CS is printed 90
degree rotated.
102
Cause
In Adobe Illustrator 10 follow the instruction
The Print Setup or
below, and then try to send the print data
Document Setup is
again:
not appropriate.
(1) Open "Print Setup" in the "File" menu.
(2) Select GT-541 as the printer, and then
click "OK".
(3) Open "Document Setup" on "File" menu.
(4) Check "Use Print Setup".
(5) Confirm the "Orientation", "Width" and
"Height".
If they are not appropriate, correct them, and
then click "OK".
The Print Setup or With Adobe Illustrator CS, landscape image
Document Setup is may not be printed properly. Correct the
not appropriate. setting following the instruction below, and
then try to send the print data again:
(1) Open "Print" in the "File" menu.
(2) Confirm that the Media Size is "Defined
by Driver".
(3) Change the Media Orientation to the
portrait.
(4) If you are not changing the Platen size,
skip to step (8). If you want to change the
Platen Size, click "Setup...", and then click
"Continue".
Print window appears.
(5) Click "Preference".
(6) Change the Platen Size in the Printer
Driver Window, and then click "OK".
(7) Click "Print" in the Print window.
(8) Confirm the preview, and then click
"Print" to send the data to your printer.
GT-541
Solution