Link-Speed LEDs
The HP J6057A/J4169A print server provides 2 light-emitting
diodes (LEDs) near the RJ-45 connector. These LEDs indicate the
operating link speed of the print server.
LED State
Description
Off
Not linked
On
Link established
at either 10
Mbps or 100
Mbps
Link Troubleshooting
If the HP J6057A/J4169A print server does not successfully connect
to the network:
both link speed LEDs (10 and 100) will be off
a "LOSS OF CARRIER ERROR" will be indicated on the Jetdirect
Configuration Page.
Note
3-24 10/100Base-TX Link Configuration
The HP J6057A/J4169A 10/100Base-TX print
server may require up to 10 seconds to establish a
connection on the network.
LEDs
ENWW